• info@frolicpaints.com
  • +91-9717599332, +91-9205272763

WET LAMINATION ADHESIVE

FR 3445 is high quality wet lamination adhesive designed for lamination on variety of films to paper/duplex board. The product displays excellent gloss and bond strength.

Key Features

  • One component.
  • Ready-to-use.
  • High mileage.
  • High heat resistance.
  • Excellent film clarity.

Typical Application

FR 3445 is recommended for following lamination structures.

  • Clear film (PVC, BOPP) to printed paper/duplex board.
  • Metalized film (PVC, BOPP) to unprinted paper/duplex board.
  • Matt BOPP to printed paper/duplex board.

Typical Physical properties

Property Value
Appearance Milky white
Solid (% NVC, at 105°C/3 hrs) 44±1
Viscosity @25°C 2000±250 cps
Film property Clear
pH 6.0±1
Shelf life 6 months (sealed container)
Freeze/thaw stability Protect from freezing

Mixing guidelines

Mix well before use. It is recommended that adhesive be mixed well prior to use to help ensure product uniformity

Mixing guidelines

Mix well before use. It is recommended that adhesive be mixed well prior to use to help ensure product uniformity.

Clean-up guidelines

Drain the adhesive from the cylinder, pan, and reservoir into the container and if required, dispose as per local, state and federal regulation. Do not allow machine wet parts to dry out, immediately rinse with tap water to remove the bulk of the adhesive residue followed by further cleaning with IPA/Ethyl Acetate or other suitable solvent to remove any further residue

Safety, handling and storage

  • Store in cool, dry, well ventilated area.
  • Protect from freezing.
  • Container once opened must be closed tightly to prevent contamination.
  • Do not mix other products without consulting technical team.
  • Stocks should be used on a first in first out basis.
  • Wash thoroughly after handling.
  • Wash contaminated goggles, face shield and gloves.
  • Do not reuse empty container without professional cleaning.

Packaging:

  • 50
    kg

  • 55
    kg