FROLIC UV
FROLIC UV with excellent gloss is suitable for high scuff, for high slip, high gloss full/flat over print coating of all types of printed paper and boards and used on anilox roller chamber coating system. It can also be used on gravure coating method.
Key Features
- Pollution free, non-hazardous, Eco-friendly, Free of Volatiles.
- Benzophenone free.
- Colorless coating, no yellowish tinge on coated papers.
- Excellent levelling and slip.
- Excellent scuff resistance with good gloss.
- Fine anchoring of UV varnish on all types of board, laminates and printed papers.
Typical Application
The products can be used for coating of :
- Printed chromo art paper.
- Metalized paper.
- Board and laminates .
- Other packaging materials.
Typical Physical properties
| Property | Value |
|---|---|
| Application | Full over print UV Varnish |
| Appearance | Translucent liquid |
| Viscosity @25°C | 150±30 cps |
| Odor | Odorless to sweet |
| Coating weight(wet) | 2 to 4 gsm |
| Shelf life | Six months from date of mfg. original seal container |
Application Guidelines
- Please consider that the quality of the dried varnish layer depends on the substrate surface as well.
- Highly absorbent papers and cardboards can cause insufficient curing, lower gloss values, poor slip properties and rub resistance problems.
- Inks containing pigments with weak fastness properties, as well as mixtures from these colors, may change shade after UV coating
Storage
- Store in air tight black containers as supplied, storage should be between 5-35°C. Product should be stirred well before use. Rotate stocks on first in first out basis.
- Keep the material away from direct sunlight & heat
Safety and Handling
- Frolic UV is non-toxic, non-hazardous and non-inflammable under normal conditions of use.
- Spillage in work place and on cloth should be immediately washed with UV wash.
- Proper ventilation should be provided in work area.
- This product is non-self-ignition, non-corrosive and non-explosive.
- To avoid risk, wear mask and gloves while handling.
- Avoid direct touching and breathing.
- If skin is contacted, promptly and thoroughly flush skin with plenty of water and soap.
- If irritation persists, seek medical attention.
- If eyes are contacted, rinse eyes immediately with large amounts of water (or 0.9% sterile salt solution) for at least 15 minutes and contact physician as needed.
Disclaimer
The data, information and suggestion contained in this literature are given purely as a recommended guide, based on our study and experience. It is recommended that prospective users verify the sustainability of the product for their intended application to their satisfaction