• info@frolicpaints.com
  • +91-9717599332, +91-9205272763

PAINT BINDER

FR750 is an aqueous Styrene Acrylate copolymer emulsion which can be used to produce coatings, textured finishes and surfacing compounds. FR750 has excellent Thermal and Mechanical stability.

Key Features

  • Free from plasticizer.
  • Good filler acceptance .
  • Excellent water resistance .
  • Excellent aging resistance .

Typical Application

FR750 is used for producing flat coating applications on plasters, masonry, fibrous cement concrete etc. FR750 has good Pigmentability due to which it is ideally suited for Masonry Paints & Texture coating with high performance and least formulation cost. .


Typical Physical properties

Property Value
Appearance Clear and hard
Solid (% NVC, at 105°C/3 hrs) 50±1
Viscosity (by B4 cup) 20-70 poise
pH 7.5-9.0
Shelf life 6-8 months (sealed container)
Freeze/thaw stability Protect from freezing

Recommended Application Guidelines

Coatings are generally made with high speed mixers by dispersing first fillers, pigments, wetting agents and auxiliaries. FR750 is added at the last let down stage.

  • To achieve film formation at lower temperature adequate quantity of coalescing solvents are to be incorporated.
  • For higher viscosity, thickeners are recommended to be added.
  • Suitable defoamer in required quantity is to be added to take care of foam during processing.
  • Biocides need to be included in the formulation to guard against micro-organism growth.

Compatibility with (polymer emulsion)

FR750 is miscible with non ionic & anionic emulsions However, there is a chance that such mixing may affect the property of FR750.

Fillers

FR750 has good compatibility with calcium carbonate, Dolomite, silica flour, fine sand etc. Also the pigment compatibility is good and can be further increased by incorporating suitable dispersing agent.

Safety, handling and storage

  • Store in cool, dry, well ventilated area.
  • Protect from freezing.
  • Container once opened must be closed tightly to prevent contamination.
  • Do not mix other products without consulting technical team.
  • Stocks should be used on a first in first out basis.
  • Wash thoroughly after handling.
  • Wash contaminated goggles, face shield and gloves.
  • Do not reuse empty container without professional cleaning.

Packaging:

  • 200
    kg