• info@frolicpaints.com
  • +91-9717599332, +91-9205272763


Frolic EPH is a low viscosity, modified, cycloaliphatic polyamine hardener, nonylphenol-free.

Key Features

  • A relatively low level of viscosity making it easy to work.
  • Good curing properties.
  • Good mechanical properties.
  • Good all-round chemical resistance.
  • Smooth, glossy, non-tacky cured films (above 12°C).
  • Good anti-corrosion protection.
  • Light-colored films with good color stability.

Typical Application

  • In combined with liquid epoxy resin, preferably such as Frolic EPR is suitable for the production of solvent-free floorings, epoxy resin mortars, and anti-corrosion coatings.

Typical Physical properties

Property Value
Appearance Clear liquid
Color (Gardner, ISO 4630) ≤1
Amine number (ISO 9702) 260-280 [mg KOH/G]
H⁺ equivalent 115 [g/eq]
Viscosity @25°C 200-400 cps
Odour Amine
Shelf life 1 years min
Vapor pressure ≤1 [Pa]
Density 1.05-1.15[g/cm³]
Flash point >130°C
Density 1.02-1.04[g/cm³]
Gel time Approx. 60 min.

Mix ratio

  • The optimum mix ratio with Frolic EPR and Frolic EPH is 100:50 parts by weight.

Safety, handling and storage

  • Store in cool, dry, well ventilated area.
  • Store In sealed container.
  • Container once opened must be closed tightly to prevent contamination.
  • Do not mix other products without consulting technical team.
  • Stocks should be used on a first in first out basis.
  • Wash thoroughly after handling.
  • Wash contaminated goggles, face shield and gloves.
  • Do not reuse empty container without professional cleaning.


Disclaimer: The data, information and suggestion contained in this literature are given purely as a recommended guide, based on our study and experience. It is recommended that prospective users verify the sustainability of the product for their intended application to their satisfaction.